Synthesis of strontium (Sr) doped hydroxyapatite (HAp) nanorods for enhanced adsorption of Cr (VI) ions from wastewater

The development of high-efficiency adsorbents for heavy metal ion removal from wastewater is highly desirable and challenging due to their synthesis complexity and low adsorption capacities. Herein, we reported the synthesis of strontium (Sr) doped hydroxyapatite (HAp) for the increased Cr (VI) adsorption. The effects of pH, temperature, and time on adsorption performances were studied. As a result, the Sr-HAp nanorods can achieve a Cr (VI) adsorption capacity of 443 mg/g, which is significantly higher than that of HAp nanorods (318 mg/g). To better understand the adsorption mechanism, the Langmuir isotherm model was established. The modeling results indicated that Langmuir monolayer chemical adsorption contributed to the efficient Cr (VI) ion removal for Sr-HAp nanorods adsorbents. The surface area and surface functional groups (O–H) contributed to the different Cr (VI) adsorption capacities between HAp and Sr-HAp.     

A new As3Mo8V4/PANi/rGO composite for high performance supercapacitor electrode

Herein, [As₂^IIIAs^VMo₈^VIV₄^IVO₄₀]₂[Cu^ICu₂^II(pz)₄]₂·9H₂O/polyaniline/reduced graphene oxide (pz = pyrazine, abbreviated to As₃Mo₈V₄/PANi/rGO) composite is first assembled, characterized and systematically explored for its supercapacitor performance. As₃Mo₈V₄/PANi/rGO composite shows a exceptional specific capacitance (2351 F g^?1 at 1 A g^?1) and outstanding cyclic stability (96.9% after 5000 cycles). The symmetric supercapacitor exhibits high specific capacitance of 1295 F g^?1 at 1 A g^?1 and excellent energy density of 88.1 Wh kg^-1 at power density of 349.6 W kg^-1, while maintaining a notable capacitance retention of 85.7% after 5000 cycles at 2 A g^-1. The above results confirm the potential application of As₃Mo₈V₄/PANi/rGO composite in energy storage devices.     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

催化剂级配技术在加氢改质装置上的工业应用

基于柴油产品质量升级的需求,中国石化大连石油化工研究院(FRIPP)开发了FHIDW加氢改质技术及配套FF-46加氢精制催化剂、FC-14B加氢改质催化剂和FDW-3临氢降凝催化剂.该技术及催化剂级配体系在格尔木炼油厂0.8 Mt·a-1加氢改质装置上的工业应用情况表明,级配催化剂体系对原料适应性强,装置运转平稳,操作灵活性高,催化剂失活速率慢,产品分布合理且质量优异,在降低柴油产品凝点的同时可以明显改善其密度和十六烷值,解决了改造前装置生产重柴油密度偏低的问题,为炼油厂生产符合国V质量标准的柴油提供了技术保障.     

Corrosion behaviors of carbon steel induced by life activities of Phaeodactylum tricornutum in a marine environment

Microbiologically influenced corrosion induced by bacteria has been studied for many years. Corrosion is known to be sensitive to the presence of microalgae, such as Phaeodactylum tricornutum. However, the life activity of P. tricornutum that influences the general and localized corrosion of carbon steel is not fully understood. The current study uses a combination of immersion tests and electrochemical experiments with a detailed surface characterization to reveal the naturally formed corrosion products with/without the presence of P. tricornutum. The results show that samples suffer from pitting corrosion and the averaged pit depths are approximately 15 μm under a light–dark cycle condition or a 24-h constant light condition. Meanwhile, the corrosion products are mainly comprised of γ-FeOOH and Fe₃O₄ in a constant light condition. However, γ-FeOOH, Fe₃O₄, and FeCO₃ are found in a light–dark cycle. This study proposes the fundamental mechanisms of the effect of P. tricornutum life activities on the corrosion performance of Q235 carbon steel, to fulfill the knowledge gaps of the presence of microalgae inducing the general and pitting corrosion of carbon steel.     

The effect of alkali metal oxide on the properties of borosilicate fireproof glass: Structure,thermal properties,viscosity, chemical stability

The purpose of the current work was to research the effect of alkali metal oxide on the structure, thermal properties, viscosity and chemical stability in the glass system (R₂O–CaO–B₂O₃–SiO₂) systematically. Because the glass would emulsify when Li₂O was added to the glass batch, this article did not discuss Li₂O. The results showed that when the amount of Na₂O was less than 4 mol.%, there was a higher interconnectivity of borate and silicate sub-networks in glass, as more mixed Si–O–B bonds were present in glass. The glass samples exhibited excellent thermal properties and chemical stabilities. As the amount of Na₂O exceeded 4 mol.%, the interconnectivity of borate and silicate sub-networks was weakened. The thermal properties and chemical stabilities of the glass samples were reduced. The connectivity of the silicate sub-network was weakened slightly as the Na/K ratio varied, and the coefficient of thermal expansion (CTE) of the glass samples gradually increased, and the resistance to thermal shock (RTS) value gradually decreased. Moreover, the viscosity of the glass samples decreased with the ratio of Na/Si and Na/K increased.     

基于深度学习的包装缺陷快速检测方法

包装缺陷在线检测对提升产品质量具有重要意义.针对工业生产中人工目检效率低、漏检率高,以及基于显式特征提取的缺陷检测方法通用性差、特征提取复杂、缺陷区域占比小等问题,本文提出了基于迁移学习的改进MobilenetV2轻量化网络的包装缺陷快速检测方法,并利用某工厂糖果产线包装质检环节存在的4种表面缺陷对其进行测试.结果 表明,该方法具有检测速度快、缺陷正确检测率高等优点,单个产品处理时间为0.053 s,验证集上缺陷识别率为98.333％,在线测试缺陷品召回率为96.596％,在检测精度较高的同时能满足高速产线的实时性需求,最高支持2 m/s的传送带运行速度.     

Microanalysis of supersaturated gas release based on wall-attached bubbles

Supersaturation of dissolved gases in natural water, due to spillage from high dams and other factors, may cause fish mortality. In previous experiments, the dissipation coefficient has been used to denote the degassing process of total dissolved gas(TDG) saturation. These experiments mainly analyzed supersaturated TDG dissipation from a macroscopic view. To precisely clarify the mechanism of supersaturated TDG release, this study investigated bubble adsorption at a wall surface from a microscopic view. The experiment was conducted in a Plexiglas-wall container filled with supersaturated TDG water. A model that calculates the adsorption flux of supersaturated TDG by a solid wall, and helps describe construction for a contact angle at a three-phase intersection, was developed according to Young's equation. This model was used to investigate the formation process of bubbles adsorbed on a solid polymethyl methacrylate(PMMA) surface in supersaturated TDG water. The adsorption effect of a solid wall on TDG release was analyzed based on the experimental data. The modeling results were compared with observations under different wall area conditions, and it was found that TDG release tended to increase with wall area. This study helps improve our understanding of the mechanisms of supersaturated TDG release and provides an important theoretical method for accurate calculation of the release process. The adsorption flux model of the solid wall provides mitigation measures to combat the adverse effects of TDG supersaturation,which will be beneficial to the protection of aquatic organisms in hydropower-regulated rivers.     

基于区间犹豫模糊语言集的水资源多目标决策

以鄂北水资源配置工程为对象,研究大型调水工程背景下的多水源多目标优化配置。将鄂北地区水库分为充蓄水库、补偿水库与在线水库等3类,根据各类水库特点对鄂北水资源配置工程进行系统概化,建立以年缺水量最小和调水成本最低为目标函数的多水源多目标优化配置模型。采用权重系数法进行求解得到非劣解集。最后采用基于区间犹豫模糊语言与TOPSIS的多目标决策方法对各方案的缺水量与调水量作出评价并遴选出最优方案。研究结果表明:对鄂北水资源配置工程而言,缺水量与调水量的权重比为7∶3的方案综合评价最优,重视缺水的同时兼顾调水成本;基于区间犹豫模糊语言集与TOPSIS的水资源多目标决策方法经本文实例验证具有较高的稳定性与可行性。     

Relationships of tensile strength with crosslink density for the high-carbon black-filled EPDM compounds with various softeners

Equilibrium swelling and rheological tests were adopted to systematically investigate the effects of softener type and dosage on the crosslink densities. The results turned out that the chemical crosslink density could be distinguished from the physical crosslink density by comparing the results of equilibrium swelling and rheological tests. The liquid butadiene (LB) as a softener leads to the greatest reduction in crosslink density, followed by polyethylene wax (PW) and paraffinic oil (PO). The tensile strength decreases with increasing PO content while shows peak values with increase of LB and PW contents. The dependencies of chemical crosslink density on the aging time under 150°C are quite different for the three softeners, which can be expected from the double crosslinking networks consisting of small softener and large main crosslinking networks. Further investigation has been performed to correlate the tensile strength with chemical crosslink density of ethylene propylene diene monomer elastomer vulcanizates. Three different linear relationships can be obtained for the softeners independent of the aging time. It can now be expected from this study that the role of some new softeners in rubber compounds is not only confined to plasticization but also forms crosslinking networks in the peroxide-cured rubbers.